Attics and Structural Components
It's What You Don't See!
Attics and Structural Components
|
|
The attic is the first component a proper roof system should address. When we do an estimate for a new roof or maintenance package, we include a written inspection of the attic. Why? From the attic we can inspect the nature of the deck or structural sheeting, (either oriented strand board, plywood, 1x8 etc.) and most importantly examine the ventilation and investigate any signs of moisture. (mold) For a detailed account of "the dangers" of wrong, inadequate or non-existent ventilation. Click Here
Manufacturers are very strict on decking, installation and ventilation requirements being met, specifically to address warranty concerns.
Check out some venting work we did on a recent reroof. The venting can be seen along both sides of the gable end. (picture; opens in new window, close window after viewing
Underlayments are numerous and varied, but essentially fall into one of two categories being:
 |
|
Our preference to the standard #30 and #15 underlayments is a special fibreglass reinforced hybrid known as "Roofer's Select". Heavier and highly water resistant, this underlayment contains 50% to 80% more asphalt than standard organic felts.
Inorganic fibreglass underlayments are also widely available. These underlayments are typically heavier and more fire resistant. We would recommend this underlayment to "beef-up" any shingle roof system and might recommend it purely as minimum manufacturer requirements.
Typically formed of rubberized polymers, they are most commonly known as "Peel & Stick". Removal of a backing exposes the adhesive surface which bonds permanently to roofs and parapets etc. Excellent for "freeze and thaw" action as well as wind driven rain extending excellent protection where it is needed or wanted.
 |
An old favorite around these parts. Known for excellent insulative and aesthetic qualities. Usually available as "grade" No. 1 and No. 2. Available widely through a number of distributors and retail outlets. |
 |
We feature an extensive range of products from the leading manufacturers in Composition Shingles, check out the selection of styles, colors, and specialty ratings available, these links will open in a new window , simply close when you are done viewing. |
|
 |
|
These products are specifically engineered for our "West Coast Winters" and offer excellent value and protection. Contact us today for more information on colors, styles, warranty, and availability.
Specifically for flat or low sloped roofs, heat activated single membrane coatings, either smooth or granulated, provide excellent value for flat roofs. We feature products from:
|
|
|
|
with 10-20 year warranties available. |
||
At first glance, the benefits of a metal roof may seem obvious.
Offering ever increasing styles and aesthetic appeal, metal roofing is quickly becoming a popular choice in residential roofing.
 |
After more than 100 years, |
No other clay tile manufacturer offers more colors, styles, fittings, textures, or finishes -- impervious to freeze-thaw degradation with less than 1% moisture absorption; color will not fade, flake, or effloresce.
Check out this cross reference table which shows all the different Roofs we specialize in and their respective characteristics!
